Gorbel 1/4 Ton Foundationless Jib Crane 8 ft Span 20 ft HUB
Availability: In stock
General Jib Crane Information
Mounting Style: FS300 Freestanding Foundationless
Capacity: 1/4 Ton
Rated Capacity: 1/4 Ton
Span: 8 Ft
Height Under Boom: 20 Ft
Mast Diameter: 8 in.
Beam Size: S6 @ 12.5 lbs/ft.
Flange Width: 3.332 in
Cap Channel: None
Crane Color: Yellow
Foundation: 5 ft. sq × 0.5 ft. deep
Overturning Moment: 5.3 K‐Ft
Axial Load: 1.47 Kips
Anchor Bolt Load: 0.85 Kips/Bolt
Design Impact: 25%
Crane OAH: 20.5 Ft
- Mast Assembly
- Boom Assembly
- Head Assembly
- Pivot Assembly
- Heavy-Walled Trunnion Rollers
Hoist Allowance: The total hoist allowance is 15% of the capacity or 75 lbs maximum.
Foundation Requirements: Centered on a square foot area free from cracks, seams, and walls. 3000 psi wire mesh reinforced concrete and soil pressure of 2500 psf. Chemical anchor bolts must withstand a minimum of 3470 lbs. pull out force.
|Freight Status||Ships LTL Freight|
|Manufacturer Part Number||FS300NP6‐8‐6-0.25T-008-020|
|Lift Capacity||1/4 Ton|
|Height Under Boom (HUB)||20 Feet|
|Degrees of Rotation||360°|
|Download Product Manual||N/A|
|Product CAD Drawing||2000-0.25T-008-020_Spec_Sheet.pdf|
Jib cranes are the most cost effective and versatile type of lifting equipment. They are great for use in production lines to keep machining cells, workstations and warehouse production moving. Jib cranes also work well to aid larger overhead crane systems. Jib cranes are easy to install and cost effective, with less structural limitations than other material handling options.
Follow these basic guidelines to help you choose the correct jib crane for your application:
Capacity: Choose a capacity that is right for current and future lifting needs. Most of the available options at JibCranes.com, up to 5 tons, include a 15% allowance for the hoisting equipment. This allows for full use of the rated jib crane capacity.
Span: Choose a span that is adequate to cover the full work area. Keep in mind that hoist and trolley selection may reduce the end approach, limiting hook coverage and requiring a move to a larger span.
Hook Height: The hook height is the height needed to lift your material. This measurement is equal to height under boom minus the headroom of the hoist and trolley.
Rotation: Jib cranes, depending on their design, have between 180° and 360° of rotation. Be sure that the area of installation is free of obstructions throughout the full range of rotation. Rotation stops are available upon request to limit the range of rotation.
Supporting Structure: When selecting a jib crane be sure to take into consideration the supporting structure. Building structures must be able to support the forces of the jib crane and load. Please, consult with your building designer or an engineer if uncertain of the adequacy of supporting structures. Also, keep in mind that the foundation requirements of freestanding jib cranes will add additional costs.