You have no items in your shopping cart.
Jib Crane Accessories
-
Enrange Flex EX System, 2-Motion, 2-Speed, 2 Transmitters by Magnetek
The Enrange™ Flex EX series of radio remote controls provides a cost-effective solution to the restrictive use of hardwired pendants. Each Enrange standard radio control system includes 2 transmitters with four 2-speed push buttons, 1 receiver, manual, transmitter label sheets, waist belt, vinyl transmitter covers, pre-wired output cable, internal transmitter and receiver antenna, extra fuses, jumpers, batteries, key switch, and necessary mounting hardware. Protective rubber boot is available as an option for additional cost and is recommended to protect against drop damage to your remote. Learn More -
Renfroe Model JPA 6 Ton Horizontal to Vertical Lifting Locking Clamp 3" - 4.125"
The Model JPA is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical to horizontal through a 180 degree arc. Incorporates a push button auxiliary lock. Permits side loading of lifting shackle to 90 degrees by derating of clamp's rated capacity. Learn More -
Renfroe Model JPA 6 Ton Horizontal to Vertical Lifting Locking Clamp 2" - 3.125"
The Model JPA is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical to horizontal through a 180 degree arc. Incorporates a push button auxiliary lock. Permits side loading of lifting shackle to 90 degrees by derating of clamp's rated capacity. Learn More -
Renfroe Model JPA 6 Ton Horizontal to Vertical Lifting Locking Clamp 1" - 2.125"
The Model JPA is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical to horizontal through a 180 degree arc. Incorporates a push button auxiliary lock. Permits side loading of lifting shackle to 90 degrees by derating of clamp's rated capacity. Learn More -
Renfroe Model JPA 6 Ton Horizontal to Vertical Lifting Locking Clamp .25" - 1.375"
The Model JPA is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical to horizontal through a 180 degree arc. Incorporates a push button auxiliary lock. Permits side loading of lifting shackle to 90 degrees by derating of clamp's rated capacity. Learn More -
Renfroe Model JPA 4 Ton Horizontal to Vertical Lifting Locking Clamp 3" – 4"
The Model JPA is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical to horizontal through a 180 degree arc. Incorporates a push button auxiliary lock. Permits side loading of lifting shackle to 90 degrees by derating of clamp's rated capacity. Learn More -
Renfroe Model JPA 4 Ton Horizontal to Vertical Lifting Locking Clamp 2" - 3"
The Model JPA is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical to horizontal through a 180 degree arc. Incorporates a push button auxiliary lock. Permits side loading of lifting shackle to 90 degrees by derating of clamp's rated capacity. Learn More -
Renfroe 8 Ton HDR Horizontal Non-Locking Lifting Clamp 0” - 3"
The Model HR is a horizontal lifting clamp intended to be used in pairs, sets of pairs, or in a tripod arrangement for transporting steel plates horizontal. The Model HDR is similar to the Model HR except that it contains dual cam assemblies which provide two gripping surfaces. WARNING - Always use in pairs or multiples - Refer to Operators Manual. Learn More -
Renfroe 6 Ton HDR Horizontal Non-Locking Lifting Clamp 0” - 2"
The Model HR is a horizontal lifting clamp intended to be used in pairs, sets of pairs, or in a tripod arrangement for transporting steel plates horizontal. The Model HDR is similar to the Model HR except that it contains dual cam assemblies which provide two gripping surfaces. WARNING - Always use in pairs or multiples - Refer to Operators Manual. Learn More -
Renfroe 3 Ton HDR Horizontal Non-Locking Lifting Clamp 0” - 2"
The Model HR is a horizontal lifting clamp intended to be used in pairs, sets of pairs, or in a tripod arrangement for transporting steel plates horizontal. The Model HDR is similar to the Model HR except that it contains dual cam assemblies which provide two gripping surfaces. WARNING - Always use in pairs or multiples - Refer to Operators Manual. Learn More -
Renfroe 1.5 Ton HDR Horizontal Non-Locking Lifting Clamp 0” - 2"
The Model HR is a horizontal lifting clamp intended to be used in pairs, sets of pairs, or in a tripod arrangement for transporting steel plates horizontal. The Model HDR is similar to the Model HR except that it contains dual cam assemblies which provide two gripping surfaces. WARNING - Always use in pairs or multiples - Refer to Operators Manual. Learn More -
Renfroe Model JPA 4 Ton Horizontal to Vertical Lifting Locking Clamp 1" - 2"
The Model JPA is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical to horizontal through a 180 degree arc. Incorporates a push button auxiliary lock. Permits side loading of lifting shackle to 90 degrees by derating of clamp's rated capacity. Learn More
Shop By
Currently Shopping by
- Lift Capacity: Remove This Item 1 Ton
Filter
- Category
- Lifting Direction
- Lifting Capacity
- Plate Thickness (inches)
- 1.75 - 2.5 (2)
- 1.25 - 2 (3)
- 0.75 - 1.5 (3)
- 0 - 1 (2)
- 1.5 - 2 (2)
- 1.25 - 1.75 (3)
- 1 - 1.5 (3)
- 0.75 - 1.25 (4)
- 0.5 - 1 (4)
- 0 - 0.75 (3)
- 0 - 1.25 (1)
- 3 - 4.125 (1)
- 2 - 3.125 (1)
- 1 - 2.125 (1)
- 0.25 - 1.375 (1)
- 3 - 4 (1)
- 2 - 3 (1)
- 1 - 2 (1)
- 0.1875 - 1.25 (1)
- 2 - 2.75 (1)
- 0 - 0.625 (1)
- 0 - 3 (1)
- 0 - 2 (3)
- Number Of Buttons
- Lift Capacity
- Manufacturer
- Pendant Speeds
- Price
- -
