Search results for '500# Cap two speed'
-
The Model JPA is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical to horizontal through a 180 degree arc. Incorporates a push button auxiliary lock. Permits side loading of lifting shackle to 90 degrees by derating of clamp's rated capacity.
Learn More
Regular Price:
$3,154.00
Special Price
$2,759.75
Out of stock
-
The Model JPA is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical to horizontal through a 180 degree arc. Incorporates a push button auxiliary lock. Permits side loading of lifting shackle to 90 degrees by derating of clamp's rated capacity.
Learn More
Regular Price:
$3,322.00
Special Price
$2,906.75
Out of stock
-
The Model JPA is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical to horizontal through a 180 degree arc. Incorporates a push button auxiliary lock. Permits side loading of lifting shackle to 90 degrees by derating of clamp's rated capacity.
Learn More
Regular Price:
$3,544.00
Special Price
$3,101.00
Out of stock
-
The Model JPA is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical to horizontal through a 180 degree arc. Incorporates a push button auxiliary lock. Permits side loading of lifting shackle to 90 degrees by derating of clamp's rated capacity.
Learn More
Regular Price:
$3,632.00
Special Price
$3,178.00
Out of stock
-
The Model HR is a horizontal lifting clamp intended to be used in pairs, sets of pairs, or in a tripod arrangement for transporting steel plates horizontal.
The Model HDR is similar to the Model HR except that it contains dual cam assemblies which provide two gripping surfaces.
WARNING - Always use in pairs or multiples - Refer to Operators Manual.
Learn More
Regular Price:
$1,248.00
Special Price
$1,092.00
Out of stock
-
The Model HR is a horizontal lifting clamp intended to be used in pairs, sets of pairs, or in a tripod arrangement for transporting steel plates horizontal.
The Model HDR is similar to the Model HR except that it contains dual cam assemblies which provide two gripping surfaces.
WARNING - Always use in pairs or multiples - Refer to Operators Manual.
Learn More
Regular Price:
$1,310.40
Special Price
$1,146.60
Out of stock
-
The Model HR is a horizontal lifting clamp intended to be used in pairs, sets of pairs, or in a tripod arrangement for transporting steel plates horizontal.
The Model HDR is similar to the Model HR except that it contains dual cam assemblies which provide two gripping surfaces.
WARNING - Always use in pairs or multiples - Refer to Operators Manual.
Learn More
Regular Price:
$1,374.88
Special Price
$1,203.02
Out of stock
-
The Model HR is a horizontal lifting clamp intended to be used in pairs, sets of pairs, or in a tripod arrangement for transporting steel plates horizontal.
The Model HDR is similar to the Model HR except that it contains dual cam assemblies which provide two gripping surfaces.
WARNING - Always use in pairs or multiples - Refer to Operators Manual.
Learn More
Regular Price:
$1,980.16
Special Price
$1,732.64
Out of stock
-
The Enrange™ Flex EX series of radio remote controls provides a cost-effective solution to the restrictive use of hardwired pendants.
Each Enrange standard radio control system includes 2 transmitters with four 2-speed push buttons, 1 receiver, manual, transmitter label sheets, waist belt, vinyl transmitter covers, pre-wired output cable, internal transmitter and receiver antenna, extra fuses, jumpers, batteries, key switch, and necessary mounting hardware. Protective rubber boot is available as an option for additional cost and is recommended to protect against drop damage to your remote.
Learn More
Regular Price:
$1,560.00
Special Price
$1,365.00
Out of stock
-
21 Foot Pendant cord assembly for a CM hoist. Configured for a CM Lodestar or Valustar Electric Chain Hoist.
Learn More
Regular Price:
$350.00
Special Price
$306.25
Out of stock
-
16 foot pendant cord assembly for a CM hoist. Configured for a CM Lodestar or Valustar electric chain hoist.
Learn More
Regular Price:
$320.00
Special Price
$280.00
Out of stock
-
11 foot Pendant cord assembly for a CM Hoist. Configured for a CM Lodestar or Valustar electric chain hoists.
Learn More
Regular Price:
$290.00
Special Price
$253.75
Out of stock