You have no items in your shopping cart.
Search results for 'Tron Air'
-
1 ton Harrington NER Electric Chain Hoist-10 ft. Lift - 14 fpm W/ Chain Container
Harrington's (N)ER enhanced features three phase electric chain hoists are equipped with the latest technology in the market today. All models include a low headroom, lightweight body with a fan-cooled motor, standard thermal motor protection and a count hour meter for preventive maintenance. All NER Hoist Ship Pre-Wired for 460-3-60 Three Phase power. Please specify inf you would like it Configure for 230v three phase for no additional charge in additional instruction area. Learn More -
1/2 ton Harrington NER Electric Chain Hoist-20 ft. Lift - 29 fpm W/ Chain Container
Harrington's (N)ER enhanced features three phase electric chain hoists are equipped with the latest technology in the market today. All models include a low headroom, lightweight body with a fan-cooled motor, standard thermal motor protection and a count hour meter for preventive maintenance. All NER Hoist Ship Pre-Wired for 460-3-60 Three Phase power. Please specify inf you would like it Configure for 230v three phase for no additional charge in additional instruction area. Learn More -
1/2 ton Harrington NER Electric Chain Hoist-15 ft. Lift - 29 fpm W/ Chain Container
Harrington's (N)ER enhanced features three phase electric chain hoists are equipped with the latest technology in the market today. All models include a low headroom, lightweight body with a fan-cooled motor, standard thermal motor protection and a count hour meter for preventive maintenance. All NER Hoist Ship Pre-Wired for 460-3-60 Three Phase power. Please specify inf you would like it Configure for 230v three phase for no additional charge in additional instruction area. Learn More -
1/2 ton Harrington NER Electric Chain Hoist-10 ft. Lift - 29 fpm W/ Chain Container
Harrington's (N)ER enhanced features three phase electric chain hoists are equipped with the latest technology in the market today. All models include a low headroom, lightweight body with a fan-cooled motor, standard thermal motor protection and a count hour meter for preventive maintenance. All NER Hoist Ship Pre-Wired for 460-3-60 Three Phase power. Please specify inf you would like it Configure for 230v three phase for no additional charge in additional instruction area. Learn More -
Patriot System 3 Motor 2 Speed Radio Remote Control System 25S11A
25S11A includes 25T11A/25R11A License Free 900 MHz Overhead Crane Remote Control System Learn More -
Patriot System 2 Motor 2 Speed Radio Remote Control System 25S10A
25S10A includes 25T10A/25R11A License Free 900 MHz Overhead Crane Remote Control System Learn More -
Patriot System 3 Motor 1 Speed Radio Remote Control System 25S08A
25S08A includes 25T10A-S08A/25R11A-S08A License Free 900 MHz Overhead Crane Radio Remote Control System. Made in the USA. Learn More -
Enrange Flex EX System, 2-Motion, 2-Speed, 2 Transmitters by Magnetek
The Enrange™ Flex EX series of radio remote controls provides a cost-effective solution to the restrictive use of hardwired pendants. Each Enrange standard radio control system includes 2 transmitters with four 2-speed push buttons, 1 receiver, manual, transmitter label sheets, waist belt, vinyl transmitter covers, pre-wired output cable, internal transmitter and receiver antenna, extra fuses, jumpers, batteries, key switch, and necessary mounting hardware. Protective rubber boot is available as an option for additional cost and is recommended to protect against drop damage to your remote. Learn More -
Renfroe 8 Ton HDR Horizontal Non-Locking Lifting Clamp 0” - 3"
The Model HR is a horizontal lifting clamp intended to be used in pairs, sets of pairs, or in a tripod arrangement for transporting steel plates horizontal. The Model HDR is similar to the Model HR except that it contains dual cam assemblies which provide two gripping surfaces. WARNING - Always use in pairs or multiples - Refer to Operators Manual. Learn More -
Renfroe 6 Ton HDR Horizontal Non-Locking Lifting Clamp 0” - 2"
The Model HR is a horizontal lifting clamp intended to be used in pairs, sets of pairs, or in a tripod arrangement for transporting steel plates horizontal. The Model HDR is similar to the Model HR except that it contains dual cam assemblies which provide two gripping surfaces. WARNING - Always use in pairs or multiples - Refer to Operators Manual. Learn More -
Renfroe 3 Ton HDR Horizontal Non-Locking Lifting Clamp 0” - 2"
The Model HR is a horizontal lifting clamp intended to be used in pairs, sets of pairs, or in a tripod arrangement for transporting steel plates horizontal. The Model HDR is similar to the Model HR except that it contains dual cam assemblies which provide two gripping surfaces. WARNING - Always use in pairs or multiples - Refer to Operators Manual. Learn More -
Renfroe 1.5 Ton HDR Horizontal Non-Locking Lifting Clamp 0” - 2"
The Model HR is a horizontal lifting clamp intended to be used in pairs, sets of pairs, or in a tripod arrangement for transporting steel plates horizontal. The Model HDR is similar to the Model HR except that it contains dual cam assemblies which provide two gripping surfaces. WARNING - Always use in pairs or multiples - Refer to Operators Manual. Learn More
Shop By
Currently Shopping by
- Lift Speed: Remove This Item 8 ft./min.
Filter
- Category
- Lifting Direction
- Lifting Capacity
- Plate Thickness (inches)
- 1.75 - 2.5 (2)
- 1.25 - 2 (3)
- 0.75 - 1.5 (3)
- 0 - 1 (2)
- 1.5 - 2 (2)
- 1.25 - 1.75 (3)
- 1 - 1.5 (3)
- 0.75 - 1.25 (4)
- 0.5 - 1 (4)
- 0 - 0.75 (3)
- 0 - 1.25 (1)
- 3 - 4.125 (1)
- 2 - 3.125 (1)
- 1 - 2.125 (1)
- 0.25 - 1.375 (1)
- 3 - 4 (1)
- 2 - 3 (1)
- 1 - 2 (1)
- 0.1875 - 1.25 (1)
- 2 - 2.75 (1)
- 0 - 0.625 (1)
- 0 - 3 (1)
- 0 - 2 (3)
- Lift Capacity
- Lift Height
- Manufacturer
- Lift Speed
- Pendant Speeds
