Jib Crane Accessories
-
Enrange Flex EX System, 2-Motion, 2-Speed, 2 Transmitters by Magnetek
The Enrange™ Flex EX series of radio remote controls provides a cost-effective solution to the restrictive use of hardwired pendants. Each Enrange standard radio control system includes 2 transmitters with four 2-speed push buttons, 1 receiver, manual, transmitter label sheets, waist belt, vinyl transmitter covers, pre-wired output cable, internal transmitter and receiver antenna, extra fuses, jumpers, batteries, key switch, and necessary mounting hardware. Protective rubber boot is available as an option for additional cost and is recommended to protect against drop damage to your remote. Learn More -
Renfroe Model J 1 Ton Horizontal to Vertical Lifting Locking Clamp 1" - 1.5"
The Model J is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical and back to horizontal through the same 90 degree arc. Learn More -
Renfroe Model J 1 Ton Horizontal to Vertical Lifting Locking Clamp .75" - 1.25"
The Model J is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical and back to horizontal through the same 90 degree arc. Learn More -
Renfroe Model J 1 Ton Horizontal to Vertical Lifting Locking Clamp .5" - 1"
The Model J is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical and back to horizontal through the same 90 degree arc. Learn More -
Renfroe Model J 1 Ton Horizontal to Vertical Lifting Locking Clamp 0" - .75"
The Model J is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical and back to horizontal through the same 90 degree arc. Learn More -
Renfroe Model J ½ Ton Horizontal to Vertical Lifting Locking Clamp 1.25" - 1.75"
The Model J is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical and back to horizontal through the same 90 degree arc. Learn More -
Renfroe Model J ½ Ton Horizontal to Vertical Lifting Locking Clamp .75" - 1.25"
The Model J is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical and back to horizontal through the same 90 degree arc. Learn More -
Renfroe Model J ½ Ton Horizontal to Vertical Lifting Locking Clamp .5” - 1”
The Model J is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical and back to horizontal through the same 90 degree arc. Learn More -
Renfroe Model J ½ Ton Horizontal to Vertical Lifting Locking Clamp 0" - 5/8"
The Model J is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical and back to horizontal through the same 90 degree arc. Learn More -
Renfroe Model JPA 6 Ton Horizontal to Vertical Lifting Locking Clamp 3" - 4.125"
The Model JPA is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical to horizontal through a 180 degree arc. Incorporates a push button auxiliary lock. Permits side loading of lifting shackle to 90 degrees by derating of clamp's rated capacity. Learn More -
Renfroe Model JPA 6 Ton Horizontal to Vertical Lifting Locking Clamp 2" - 3.125"
The Model JPA is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical to horizontal through a 180 degree arc. Incorporates a push button auxiliary lock. Permits side loading of lifting shackle to 90 degrees by derating of clamp's rated capacity. Learn More -
Renfroe Model JPA 6 Ton Horizontal to Vertical Lifting Locking Clamp 1" - 2.125"
The Model JPA is a vertical lifting clamp capable of turning a single plate or member from horizontal to vertical to horizontal through a 180 degree arc. Incorporates a push button auxiliary lock. Permits side loading of lifting shackle to 90 degrees by derating of clamp's rated capacity. Learn More