Gorbel 3 Ton Wall Bracket Jib Crane 14 Foot Span
Availability: In stock
Gorbel's WB100 wall bracket jib crane is their most economical heavy duty jib crane option.
These jibs cranes are designed to provide coverage in individual works cells or bays, either along a wall or on columns in a plant. They can be used on their own or to supplement overhead cranes or monorail systems.
Two important requirements must be met before installing the Wall Bracket Series:
- A structurally adequate wall or column to support the jib crane must exist
- Sufficient clearance above the boom throughout its arc to accommodate the tie rod suspension must exist.
General Jib Crane Information
Mounting Style: WB100 Wall Bracket
Rated Capacity: 3 Ton
Span: 14 Ft
Flange Width: 4.661 in
Crane Color: Yellow
Bracket Fitting Size: G3
Overturning Moment: 23.514 Kips
Axial Load: 8.7556 Kips
Thrust and Pull: 23.514 Kips
Bracket Centers: 5 Feet -0.25 Inches
- Boom Assembly
- Wall Brackets
- End of Beam Bracket
- Tie Rod
Hoist Allowance: The total hoist allowance is 15% of the capacity or 150 lbs maximum.
Mounting Requirements: Mounting hardware is not supplied by Gorbel or Jibcranes.com and must be purchased separately. A structurally adequate wall or column is required to support the jib. Please consult a structural engineer or your building manufacturer to ensure that adequate support structure is available.
|Freight Status||Call 1-800-509-6131 for Freight Quote.|
|Manufacturer Part Number||WB100-G3-14-S10-003T-014|
|Lift Capacity||3 Ton|
|Height Under Boom (HUB)||n/a|
|Mounting Type||Wall / Column Mount|
|Degrees of Rotation||200°|
|Download Product Manual||N/A|
|Product CAD Drawing||2001-003T-014_Drawing.pdf|
Jib cranes are the most cost effective and versatile type of lifting equipment. They are great for use in production lines to keep machining cells, workstations and warehouse production moving. Jib cranes also work well to aid larger overhead crane systems. Jib cranes are easy to install and cost effective, with less structural limitations than other material handling options.
Follow these basic guidelines to help you choose the correct jib crane for your application:
Capacity: Choose a capacity that is right for current and future lifting needs. Most of the available options at JibCranes.com, up to 5 tons, include a 15% allowance for the hoisting equipment. This allows for full use of the rated jib crane capacity.
Span: Choose a span that is adequate to cover the full work area. Keep in mind that hoist and trolley selection may reduce the end approach, limiting hook coverage and requiring a move to a larger span.
Hook Height: The hook height is the height needed to lift your material. This measurement is equal to height under boom minus the headroom of the hoist and trolley.
Rotation: Jib cranes, depending on their design, have between 180° and 360° of rotation. Be sure that the area of installation is free of obstructions throughout the full range of rotation. Rotation stops are available upon request to limit the range of rotation.
Supporting Structure: When selecting a jib crane be sure to take into consideration the supporting structure. Building structures must be able to support the forces of the jib crane and load. Please, consult with your building designer or an engineer if uncertain of the adequacy of supporting structures. Also, keep in mind that the foundation requirements of freestanding jib cranes will add additional costs.