Gorbel 1/2 ton Freestanding Workstation Jib Crane 12 ft Span 10 ft HUB
Availability: In stock
Gorbel Workstation Jib Cranes provide excellent coverage in circular areas not efficiently served by a main crane. They are ideal for supporting tool balancers, air balancers, hoists, vacuum lifters and welding wire feeders. The freestanding jib crane design allows for a full 360° rotation of the jib.
Gorbel’s Workstation Jib Crane Advantage:
Gorbel Work Station Jib Cranes are easier to move and position than traditional I - beam jibs. The enclosed track design keeps rolling surfaces clean and contributes to easier movement and longer life. The track’s low weight - per - foot reduces the dead weight of the boom. Gorbel enclosed track profiles feature 2° taper in the lower running flange, which helps to center the trolley in the track, increase wheel life and allow smooth rolling of the trolleys.
Unsurpassed Ease of Rotation
Steel enclosed track workstation jibs weigh less and rotate easier than traditional I - beam cranes.
Precise Load Positioning
Hoist trolleys feature low rolling resistance and lubricated-for-life sealed bearings. This combined with easy rotation of the boom help to position and spot loads with precision.
General Jib Crane Information
Mounting Style: WSJ360 Freestanding
Capacity: 1/2 ton
Span: 12 Feet
Height Under Boom: 10 Feet
Track Series: 1000
Crane Color: Gorbel Blue
Foundation: 48 In. Sq. x 48 In. Dp.
Anchor Bolt Load: 3.35 Kips
Overturning Moment: 16.97 K‐Ft
Axial Load: 1.91 Kips
Crane OAH: 11.72 ft.
- Mast Assembly
- Boom Assembly
- Square Baseplate
- Pivot Assembly
- Hoist Trolley
Hoist Allowance: The total hoist allowance is 15% of the capacity.
Foundation Requirements: Centered on a square foot area that is free from cracks, seams, and walls. Reinforced Concrete with Pressure of 3000 psi and Soil Pressure of 2500 psf. Chemical anchor bolts to withstand a minimum of 3,470 lbs. of pull out force. Concrete must contain wire mesh reinforcement
|Freight Status||Call 1-800-509-6131 for Freight Quote.|
|Manufacturer Part Number||WSJ360-1000-10-12|
|Lift Capacity||1/2 Ton|
|Height Under Boom (HUB)||10 Feet|
|Degrees of Rotation||360°|
|Download Product Manual||N/A|
|Product CAD Drawing||N/A|
Jib cranes are the most cost effective and versatile type of lifting equipment. They are great for use in production lines to keep machining cells, workstations and warehouse production moving. Jib cranes also work well to aid larger overhead crane systems. Jib cranes are easy to install and cost effective, with less structural limitations than other material handling options.
Follow these basic guidelines to help you choose the correct jib crane for your application:
Capacity: Choose a capacity that is right for current and future lifting needs. Most of the available options at JibCranes.com, up to 5 tons, include a 15% allowance for the hoisting equipment. This allows for full use of the rated jib crane capacity.
Span: Choose a span that is adequate to cover the full work area. Keep in mind that hoist and trolley selection may reduce the end approach, limiting hook coverage and requiring a move to a larger span.
Hook Height: The hook height is the height needed to lift your material. This measurement is equal to height under boom minus the headroom of the hoist and trolley.
Rotation: Jib cranes, depending on their design, have between 180° and 360° of rotation. Be sure that the area of installation is free of obstructions throughout the full range of rotation. Rotation stops are available upon request to limit the range of rotation.
Supporting Structure: When selecting a jib crane be sure to take into consideration the supporting structure. Building structures must be able to support the forces of the jib crane and load. Please, consult with your building designer or an engineer if uncertain of the adequacy of supporting structures. Also, keep in mind that the foundation requirements of freestanding jib cranes will add additional costs.