Eriez SafeHold Magnet RPL-70 7,000 Pound Capacity Crane Magnet
Availability: In stock
Regular Price: $4,208.00
Special Price $3,997.60
Lift, move or position round or flat materials with the same magnet. Specially designed poles on this new series of magnets allow the user to lift round materials up to 2,200 pounds.SafeHold® Lifting Magnets make quick work of difficult, time-consuming steel handling.
Eriez’ new SafeHold RPL Series Permanent Lifting Magnets can lift and transfer steel and iron without slings, hooks or cables – and, without marring the surface. They require fewer operators and helpers, and when properly installed and operated, provide greater safety than many other mechanical material-handling devices.
They can be used singly or in multiples on a spreader beam.
SafeHold® RPL Series permanent magnets turn off and on manually to provide smooth operation for hundreds of lifting-positioning applications.
- Two pole design
- Handle round and flat material with the same magnet
- Continuous magnet power until magnet is turned off
- No costly D.C. power supply
- No batteries to recharge or replace
Lift Capacity Flat Steel
Lift Capacity Round Steel
|Freight Status||Call 1-800-509-6131 for Freight Quote.|
|Manufacturer Part Number||RPL-70|
|Maximum Rated Plate Steel Load||7,000 lbs.|
|Maximum Rated Round Steel Load||N/A|
Jib cranes are the most cost effective and versatile type of lifting equipment. They are great for use in production lines to keep machining cells, workstations and warehouse production moving. Jib cranes also work well to aid larger overhead crane systems. Jib cranes are easy to install and cost effective, with less structural limitations than other material handling options.
Follow these basic guidelines to help you choose the correct jib crane for your application:
Capacity: Choose a capacity that is right for current and future lifting needs. Most of the available options at JibCranes.com, up to 5 tons, include a 15% allowance for the hoisting equipment. This allows for full use of the rated jib crane capacity.
Span: Choose a span that is adequate to cover the full work area. Keep in mind that hoist and trolley selection may reduce the end approach, limiting hook coverage and requiring a move to a larger span.
Hook Height: The hook height is the height needed to lift your material. This measurement is equal to height under boom minus the headroom of the hoist and trolley.
Rotation: Jib cranes, depending on their design, have between 180° and 360° of rotation. Be sure that the area of installation is free of obstructions throughout the full range of rotation. Rotation stops are available upon request to limit the range of rotation.
Supporting Structure: When selecting a jib crane be sure to take into consideration the supporting structure. Building structures must be able to support the forces of the jib crane and load. Please, consult with your building designer or an engineer if uncertain of the adequacy of supporting structures. Also, keep in mind that the foundation requirements of freestanding jib cranes will add additional costs.