Coffing WR 1/2 Ton Wire Rope Hoist 25 ft Lift 21 fpm Push Trolley
Availability: In stock
Regular Price: $4,470.20
Special Price $3,688.48
Capacities & Lift
Rated loads from 1/2 to 5 tons, with lifts from 15 ft. to 70 ft. based on models. Standard push button drop is 4 ft. less than lift.
Voltages & Motor Options
115/230 (single phase); 230/460, 208, 220/380, 575 (three phase) 60 hertz or 50 hertz. Two-speed motors available (3 to 1 speed ratio).
WR Models are available with 2-part standard; 4-part standard; True Vertical Lift; and Low Headroom options.
Hoist can be Lug, Plain, Geared, or Motorized Trolley mounted.
Adjustable Limit Switch
Regulate upper and lower load travel. Stainless steel and brass components provide exceptional repeatability and positioning.
Oil Bath Transmission
Gears are precision machined of alloy steel and run in an oil bath for longer, quieter operation.
Small Frame Design
Features housings of cast aluminum alloy construction for minimum weight. Engineered and designed for use with motors up to 1 HP.
Large Frame Design
Features load bearing housings of ductile iron construction for maximum strength. Non-load bearing housings of cast aluminum alloy for minimum weight. Engineered and designed for use with higher torque 2 and 3 HP three phase motors.
Machined Steel Drum
Precision grooves are machined to a depth 50% of the wire rope diameter.
Under-the-cover Variable Frequency Drives offer In-field, instant programming - from infinitely variable (12:1 speed ratio) to any intermediate, predetermined speed range. VFD’s can also be externally mounted to Motorized Trolley Units.
All 3 phase hoists ship configured to 460 voltage unless otherwise requested.
|Freight Status||Call 1-800-509-6131 for Freight Quote.|
|Lift Capacity||1/2 Ton|
|Lift Height||25 ft.|
|Electrification Type||Three Phase|
|Lift Speed||21 ft./min.|
|Manufacturer Part Number||WRMT1021|
Jib cranes are the most cost effective and versatile type of lifting equipment. They are great for use in production lines to keep machining cells, workstations and warehouse production moving. Jib cranes also work well to aid larger overhead crane systems. Jib cranes are easy to install and cost effective, with less structural limitations than other material handling options.
Follow these basic guidelines to help you choose the correct jib crane for your application:
Capacity: Choose a capacity that is right for current and future lifting needs. Most of the available options at JibCranes.com, up to 5 tons, include a 15% allowance for the hoisting equipment. This allows for full use of the rated jib crane capacity.
Span: Choose a span that is adequate to cover the full work area. Keep in mind that hoist and trolley selection may reduce the end approach, limiting hook coverage and requiring a move to a larger span.
Hook Height: The hook height is the height needed to lift your material. This measurement is equal to height under boom minus the headroom of the hoist and trolley.
Rotation: Jib cranes, depending on their design, have between 180° and 360° of rotation. Be sure that the area of installation is free of obstructions throughout the full range of rotation. Rotation stops are available upon request to limit the range of rotation.
Supporting Structure: When selecting a jib crane be sure to take into consideration the supporting structure. Building structures must be able to support the forces of the jib crane and load. Please, consult with your building designer or an engineer if uncertain of the adequacy of supporting structures. Also, keep in mind that the foundation requirements of freestanding jib cranes will add additional costs.