2 ton CM Lodestar 4265NH Model RR 230/460 Three Phase 20 ft. Lift
Availability: In stock
Regular Price: $5,996.58
Special Price $3,892.32
Introducing the Next Generation of Lodestar
Columbus McKinnon Corporation presents the new Lodestar.
Made in the USA, the new Lodestar features:
- Quieter operation
- An environment friendly design
- Easier access to key components
- Higher duty cycles
- Less maintenance
- Enhanced safety features.
Available as individual units, in hoist/trolley combinations,
or as integral components of complete lifting
systems, the next generation of Lodestar takes lifting to
new heights for professionals in any industry.
With a history of unsurpassed performance and over
a million units sold, the next generation of Lodestar
continues this legacy.
Columbus McKinnon Lodestar Next Generation Electric Chain Hoist
|Freight Status||Ships LTL Freight|
|Electrification Type||Three Phase 230/460|
|Manufacturer Part Number||4265NH|
|Chain Container||Included Free!|
|Pendant Speeds||One Speed|
|Lift Height||20 ft.|
|Lift Speed||16 ft./min.|
|Lift Capacity||2 Ton|
|Download Product Manual||N/A|
Jib cranes are the most cost effective and versatile type of lifting equipment. They are great for use in production lines to keep machining cells, workstations and warehouse production moving. Jib cranes also work well to aid larger overhead crane systems. Jib cranes are easy to install and cost effective, with less structural limitations than other material handling options.
Follow these basic guidelines to help you choose the correct jib crane for your application:
Capacity: Choose a capacity that is right for current and future lifting needs. Most of the available options at JibCranes.com, up to 5 tons, include a 15% allowance for the hoisting equipment. This allows for full use of the rated jib crane capacity.
Span: Choose a span that is adequate to cover the full work area. Keep in mind that hoist and trolley selection may reduce the end approach, limiting hook coverage and requiring a move to a larger span.
Hook Height: The hook height is the height needed to lift your material. This measurement is equal to height under boom minus the headroom of the hoist and trolley.
Rotation: Jib cranes, depending on their design, have between 180° and 360° of rotation. Be sure that the area of installation is free of obstructions throughout the full range of rotation. Rotation stops are available upon request to limit the range of rotation.
Supporting Structure: When selecting a jib crane be sure to take into consideration the supporting structure. Building structures must be able to support the forces of the jib crane and load. Please, consult with your building designer or an engineer if uncertain of the adequacy of supporting structures. Also, keep in mind that the foundation requirements of freestanding jib cranes will add additional costs.